Wren Engineering Private Limited

WREN high speed all geared high speed high precision lathe machine Model C6266B*2000 with brake, coolant pump, machine lamp, 3 jaw and 4 jaw chuck along with other mentioned standard accessories

Features

1.Machine head stock and bed, tailstock, supporting plate,etc. the combination of surface between manual scraping, machine to undergo a rigirous inspection, effectively ensure the machine tool accuracy and stability.

2.Machine adopts high strength cast iron, copper and chromium special materials are added, the bed width 400mm, bed rail quenching depth up to 4mm, effectively improves the agreeaility and stability of the machine.

3.This series lathe machine is suitable for internal and external turning, tapering, and other rotating faces, metric, module and inch threads, as well as drilling and pull oil slot.

4.Width of bed is wider than normal lathe machine, with high hardness on guideway, the guideway is through high-frequency quenching, wear-resisting.

5.This machine is easy to operate, with rapid device for carriage, design with single hand wheel to operate.

6.The strength and rigidity of machine is higher than normal lathe machine, high efficiency, suit for heavy duty machining.

Technical Specification 

1.Model: C6266B*3000

2.Max. swing over bed(mm) Dia: 660

3.Max. swing over crossslide(mm) Dia: 420

4.Admit Between centers: 3000mm 

5.Max swing in gap(mm)Dia: 790

6.Bed width: 330mm

7.Spindle hole Dia: 80mm

8.Spindle nose: ISO-D8

9.Spindle speeds(Number): 15 Steps

10.Spindle speeds(Number): 16

11.Range of Spindle Speed: 25-1800RPM

12.Module threads range(Kinds): 0.25-60MP(46Kinds)

13.Max. Cross Slide travel: 368mm

14.Compound rest travel: 230mm

15.Cross-section size of toolshank: 25*25mm

16.Taper of tailstock sleeve/Quill Taper:MT5

17.Dia. of Tailstock sleeve: 90mm

18.Travel of tailstock sleeve: 235mm

19.Main motor power: 7.5KW(10 HP)

20.Packing Size(L*W*H)(mm): 3740*1140*1840mm

21.Net Weight/Gross Weight: 3750/4050Kgs

Std Accessories Supplied With

1.Face Plate

2.Toolbox

3.Foundation bolt

4.Halogen Lamp

5.Foot brake

6.Oil Gun

7.Center Sleeves

8.Splash Guard

9.Center

10.All Electrical motors switches

11.4 Jaw Suitable Chuck

Opt Accessories

1.Digital readout system with suitable linear scales(Rs 32000)

2.Taper Turning Attachment(Rs 12600)

3.Quick change Type tool post(Rs 16500)

WREN pipe Thread Lathe  Pipe thread lathe is a horizontal lathe designed for turning large-diameter pipe fittings. It features a large through-hole diameter of the main shaft (generally 135mm or more) and a chuck at the front and rear of the spindle box for large-diameter pipe fittings. Or the clamping and processing of the bar, the product is widely used in mechanical manufacturing, petroleum, chemical, coal, geological exploration, urban water supply and drainage industries

Minimum Order Quantity: 1 No

Parts Available: Yes

After Sale Services: Yes

Features

1. Big spindle bore and double chuck allows clamp and process big diameter pipes

2. Integral machine bed adopts high strength iron to relize high rigidity and precision

3. Ultrasonic frequency quenched guide-ways are hard enough for good wear-resistance

4. Equiped with taper guide bar device this enables the machine to process taper threads

Technical Specification

1.Machine Model: QK1319

2.Swing over bed mm: 630/800mm

3.Swing over cross slide: 340/540mm

4.Distance between centers: 2000mm

5.Pipe threading range: Ø50-193 mm

6.Width of bed way: 550mm

7.Max. load capacity: 3000kgs

8.Spindle bore: 200mm

9.Spindle speed steps: step-less

10.Spindle speed range: 0-600rpm

11.Chuck size: 500mm

12.Chuck type: 3 jaw manual 

13.Turrent type: NC turrent 4 position 

14.Tool shank size: 32*32mm

15.X axis travel: 320/420mm

16.Z axis travel: 1850mm

17.X axis rapid traverse speed: 4000mm/min

18.Z axis rapid traverse speed: 4000mm/min

19.Tailstock quill diameter: 100mm

20.Tailstock quill taper: MT#5

21.Tailstock quill travel: 250mm

22.Main spindle motor: Servo 15KW

23.Coolant pump motor: 0.125KW

24.Positioning accuracy: 0.020mm

25.Repositioning accuracy: 0.010mm

26.Width* Height: 1450*1560mm

27.Length: 4257mm

28.Net weight: 4600 Kgs

• This high quality 3 jaw self-centering chuck is designed for lathes and other precision machining applications.
• The body is made from high quality ductile iron, and the jaws are heat treated to ensure a long life and accurate results.
• Sharp 3 Jaw Self Centering Chuck is perfect for any shop looking to do some precision machining! This chuck is made from high quality cast iron and has a three-jaw design that makes centering your workpiece a breeze.
• With its reversible hardened jaws, this chuck can clamp a wide variety of workpieces securely.
• The body is made of C.I. (Cast Iron), so it is strong and durable. Plus, the three jaws are self-centering to ensure accurate clamping every time.